FJ-11 Super headlights

FJ-11 mini-lights use of "sophisticated" concept for the design, manufacture. Lighting some of the ultra bright white light tubes as a light source, with energy-saving, maintenance-free advantages. Light body "flying saucer" shape envisaged, the fine structure of the mold, and perfect, with science, sophisticated instrument panel, modern science and technology as a whole has a sense of luxury and refinement combined into one, can be called in light of the fine. Instrument panel using the four-power instructions designed to be table-voltage visual effects; design of the under-voltage direct function when electricity is available less than or equal to 1 / 4, the battery voltage to light up signs to remind users of electricity shortage; design of the lighting instructions Function to remind the user to light up the lights in the state. Lights in the design of high-low-power electronic speaker loudness; own design of the flash-flash to the circuit, according to the needs of different user-lights will flash for two-turn directions or flash mode (for anti-fog lights or warning function ). Die support structure with power locks and power locks with different configuration requirements, users need to power locks, available with a factory for electric vehicles with small lights of the high-end custom-specific lock (or double-lock) "five co - "(Lighting, speakers, instruments, flash, power locks) products.

Technical parameters

1. Lighting: 5 cents white LED, brightness ≥ 10000 Candela (mcd), a total of 6.
2. Power show: 24V from right to left-out voltage of 25V, 24V, 23V, 22V (± 0.5V); 36V to-36V, 35V, 34V, 33V (± 0.5V); 48V to 50V, 48V, 46V, 44V (± 0.5V). Finally, an under-voltage lights off when enough electricity to light up the instructions.
3. E-horn: Electronic, loudness ≥ 90 dB.
4. To light: LED built-in ceremony.
5. Flash frequency: 80 ± 5 times / min.
6. The largest power: ≤ 2.5W (36V type, including lighting).
7. Power locks: long working hours on the current ≤ 15A; the largest transient (≤ 5s) current workers ≤ 20A; load switch current ≤ 10A; contact and mechanical life of ≥ 1 million (load current ≤ 5A). Low current switching in favor of extending the service life of contact.

Note wiring

1. Without the power-lock: ⑴ positive and negative power supply: 0.22mm red, black line, the exposed length 20mm ~ 30mm, SM-2A plastic plug-in, a red (is), and 2 (negative); ⑵ horn button: 0.22mm red , Pink line, the exposed length of 20mm ~ 30mm, SM-2Y plastic plug-in, a red (power is), 2 pink. ⑶ to control: 0.22mm yellow, brown, green line, the exposed length of 20mm ~ 30mm, SM-3Y plastic plug-in, Green 1, Brown 2, 3 yellow, brown-yellow flashing lights connected to the left, right through the green light brown Flicker.
2. With the power-lock: ⑴ main power input is: 1.52mm red line, thickening 4 cents nickel Block; ⑵ main power of negative input: 0.52mm black, Pu 4 cents; ⑶ main power output is: 1.52mm red, thickening 4 cents in the first nickel; ⑷ horn button and other: with "1" of the relevant line; ⑸ line all the exposed length 20mm ~ 30mm.
3. When used with the use of plant products with the plug-in connections, such as the need to connect to the built-in part of the shell, the shell may be into the line of the Department cover is opened, will be used in connection with the plug-in and plug-in connections Straighten out the wire placed in the appropriate case in progress after the co-Line Service cover

Commitment to quality

1. Factory products for the implementation of three packets of explicit performance, including with the 12-month period, according to the revised package, OZ, the Baotui order; Where, after acceptance by users of the products used, the implementation of the "amendment package." Exports by 5 ‰ less than or equal to the ratio of one-time "three packs" (that is, after-sale).
2. The appearance of quality products to customers after passing the acceptance is the use of authorized users have been using the product, the product is no longer involved in the quality of the appearance of the controversy, but the factory with an open mind to accept the recommendation of users and other reasonable request.
3. As a result of the unusual damage caused by external force, and the use of the product in the process of natural aging, does not belong to the scope of quality assurance, but the factory will provide an update of paid services. Factory to use the materials in line with the requirements of users.
4. Factory to draw attention to the user to keep the factory when the factory settings, with a view to protect the interests of both sides.