FJ-9 Super headlights

FJ-9-light the use of small "fine" concept development, manufacture, use of lighting some of the symmetry of the two-group setting, it is also known as "Light." FJ-9-6 small lamps used as a high-grade white LED light source, with the exception of energy-saving, maintenance-free advantages, in line with future market trends in science and technology, modern and luxurious feel. There are lights inside the built-in specially designed high-loudness of the e-speakers, four-direction power, power, lighting, under-voltage direct. Die structure to support the installed power locks and power locks installed different configuration requirements, users need to power locks, available with a factory for electric vehicles with small lights of the development of long-lived exclusive lock "four-in-one" product.

Technical parameters

1. Lighting: 5 cents white LED, brightness ≥ 10000 Candela (mcd), a total of 6.
2. Direct power: 24V from right to left-out voltage of 25V, 24V, 23V, 22V (± 0.5V); 36V to-36V, 35V, 34V, 33V (± 0.5V); 48V to 50V, 48V, 46V, 44V (± 0.5V). Finally, put out a voltage when Light enough electricity to light up the instructions.
3. E-horn: Electronic, loudness ≥ 90DB.
4. The largest power: ≤ 2.5W (36V type, including lighting).
5. Power locks: long working hours on the current ≤ 15A; the largest transient (≤ 5s) current workers ≤ 20A; load switch current ≤ 10A; contact and mechanical life of ≥ 1 million (load current ≤ 5A). Low current switching in favor of extending the service life of contact.

Note wiring

1. Without the power-lock: ⑴ positive and negative power supply: 0.22mm red, black line, the exposed length 20mm ~ 30mm, SM-2A plastic plug-in, a red (is), and 2 (negative); ⑵ horn button: 0.22mm red , Pink line, the exposed length of 20mm ~ 30mm, SM-2Y plastic plug-in, a red (power is), 2 pink.
2. With the power-lock: ⑴ main power input is: 1.52mm red line, thickening 4 cents nickel Block; ⑵ main power of negative input: 0.52mm black, Pu 4 cents; ⑶ main power output is: 1.52mm red, ￠ 4 thickening in the first nickel; ⑷ horn button: "1" of the relevant line; ⑸ line all the exposed length 20mm ~ 30mm.
3. When used with the use of the product with the plug-in connections, such as the need to connect to the built-in part of the shell, the shell may be into the line of the Department cover is opened, will be used to connect the plug-in and plug-in connection with the rationale wire Shun placed in the appropriate case in progress after the co-Line Service cover .

Commitment to quality

1. Factory products for the implementation of three packets of explicit performance, including with the 12-month period, according to the revised package, OZ, the Baotui order; Where, after acceptance by users of the products used, the implementation of the "amendment package." Exports by 5 ‰ less than or equal to the ratio of one-time "three packs" (that is for sale ).
2. The appearance of quality products to customers after passing the acceptance is the use of authorized users have been using the product, the product is no longer involved in the quality of the appearance of the controversy, but the factory with an open mind to accept the recommendation of users and other reasonable request.
3. As a result of the unusual damage caused by external force, and the use of the product in the process of natural aging, does not belong to the scope of quality assurance, but the factory will provide an update of paid services. Factory to use the materials in line with the requirements of users.
4. Factory to draw attention to the user to keep the factory when the factory settings, with a view to protect the interests of both sides.